| ||||||||
| Instructions |
The application of our flushable liners is indeed as easy as 1-2-3. Here is the
step-by-step instruction.
1. Placing the Liner
To place a liner into your pouch,
1) Make sure your hands are dry.
2) Squeeze the liner together in one hand and drop into the pouch opening.
3) Insert the index and middle fingers into the liner and work the liner across the face of
the pouch to both sides of the pouch and give it a light blow.
4) Place three fingers into the mouth of the liner and pull the loose liner material over
the pouch ring with your free hand.
5) Fill the liner out with another light blow into the liner opening. This will further put the
liner into a good position. Now smooth out any wrinkles around the pouch ring. You are
now ready to snap the pouch and liner onto the wafer. Check it twice to make sure it is
sealed to the wafer.
2. Removing the Liner
To remove the liner from the pouch, use all five fingers to close the liner opening from
both sides and lift the liner partly out of the pouch. Now reach down and pull one corner
out first, the rest will come out easier.
In case of an OVERLOAD, just tip the pouch into the toilet and squeeze it out. Then pull
the liner out and flush it all down.
3. Flushing the Liner
To flush the liner, just put the liner in the toilet and give it a Flush.
| ||||||||||||||||||||||||||||||||||||||||||||||
